PROTO® 3/4" DRIVE IMPACT SOCKET 1" - 8 POINT

SIZE [IN]                                             1    

NUT END OUTSIDE DIAMETER [IN]        2   

DRIVE END OUTSIDE DIAMETER [IN]     1-3/4

NUT DEPTH [IN]                                   5/8           

BOLT CLEARANCE DEPTH [IN]               1-5/32         

OVERALL LENGTH [IN]                           2-1/8   

 WEIGHT [LBS]                                     1.23

 CRUSH RETAINING RING                      JRR07523         

O-RING                                               J07500R

RETAINING PIN                                    J07500P

• Proto® 8 Point Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
• The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners.
• The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage.
• The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
• Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls.
• Tight tolerances for snug fit on fastener.
• Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners.
• Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude.
• Impact sockets are designed to withstand higher torque and force associated with impact tools in repetitive application.
• Features two through holes and a groove to accept a Proto® Retaining Ring or pin and o-ring to help secure the socket to the drive tool anvil.
• Stamped size for easy reference.
• Side locking hole.